M300, M300S, M380, M380S
GARDEN
S - Magnum Pump Kit
Our 'GARDEN' compact range for cutting grass and bushes. Suited for 40-50 HP tractors.
Standard
- Adjustable roller
- Cable controls
- Cardan joint and stabilizers
- Connection by 3 points
- Floating system on the first arm and flail head
- Helicoidal rotor pattern
- Hydraulic security with adjustable valve
- Possibility of reversibility (left / right assembling)
- Rotor reverse
- Safety mechanical lock for transport on the road
- Special top link connection for tractors with only one top link position
- 25 HP Pump Kit (M300S / M380S)
- Heat Exchanger (M380 / M380S)
- Cutting-Head: GREEN 800
- Minimum dimension in transport position: cm (M300 / M300S / M380 / M380S)
Options
- 360° Rotation
- Electric Controls With Mono-Lever
- Electric Start / Stop of Rotor
- Oleo Pneumatic Float for First Arm
- Proportional Electric Load Sensing Controls
- Rear shock-proof bar and lights
- Special top link connection for tractors with only one top link position
- Super Rotation 360 degrees
- VSC LCD Display Screen
- Heat Exchanger (M300 / M300S)
Width | Engine HP | Weight | No. rotor revolutions | No. Blades | Rotating Head | Oil | Tractor HP | Tractor Weight | Tractor Width | PTO | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| cm | Hp | Kg | r/min | No. | ° | lt | Hp | Kg | cm | PTO | |
| M300 | 80 | 15 | 400 | 2800 | 32 | 190 | 95 | 40 | > 900 | 130 | 540 |
| M300S | 80 | 25 | 410 | 2800 | 32 | 190 | 95 | 40 | > 900 | 130 | 540 |
| M380 | 80 | 15 | 430 | 2800 | 32 | 190 | 95 | 50 | > 940 | 130 | 540 |
| M380S | 80 | 25 | 440 | 2800 | 32 | 190 | 95 | 50 | > 940 | 130 | 540 |
| Position | M300 | M300S | M380 | M380S |
|---|---|---|---|---|
| CM | CM | CM | CM | |
| A | 390 | 390 | 310 | 310 |
| B | 460 | 460 | 380 | 380 |
| C | 330 | 330 | 250 | 250 |
| D | 320 | 320 | 240 | 240 |
| E | 370 | 370 | 290 | 290 |
| F | 110 | 110 | 110 | 110 |
| H | 160 | 160 | 160 | 160 |
A - Max working length on levelled ground
B - Max working length in vertical position
C - Max working length at 45°
D - Max working length at 45° (ditch)
E - Max height above the side a hedge
F - Minimum height above the side of the hedge
H - Minimum width of tractor and machine on hedge