M250, M250S, M290, M290S
GARDEN
S - Magnum Pump Kit
Our 'GARDEN' compact range for cutting grass and bushes. Suited for 20-30 HP tractors.
Standard
- Adjustable roller
- Cable controls
- Cardan joint and stabilizers
- Connection by 3 points
- Floating system on the first arm and flail head
- Helicoidal rotor pattern
- Mechanical security
- Possibility of reversibility (left / right assembling)
- Rotor reverse
- Safety mechanical lock for transport on the road
- Special top link connection for tractors with only one top link position
- 25 HP Pump Kit (M250S / M290S)
- Heat Exchanger (M250S / M290S)
- Cutting-Head: GARDEN 600
- Minimum dimension in transport position: cm (M250 / M250S / M290 / M290S)
Options
- 360° Rotation
- Electric Controls With Mono-Lever
- Electric Start / Stop of Rotor
- Oleo Pneumatic Float for First Arm
- Proportional Electric Load Sensing Controls
- Rear shock-proof bar and lights
- Special top link connection for tractors with only one top link position
- Super Rotation 360 degrees
- VSC LCD Display Screen
- Heat Exchanger (M250 / M290)
Width | Engine HP | Weight | No. rotor revolutions | No. Blades | Rotating Head | Oil | Tractor HP | Tractor Weight | Tractor Width | PTO | |
---|---|---|---|---|---|---|---|---|---|---|---|
cm | Hp | Kg | r/min | No. | ° | lt | Hp | Kg | cm | PTO | |
M250 | 60 | 15 | 305 | 2800 | 24 | 190 | 70 | 20/30 | > 800 | 100/120 | 540 |
M250S | 60 | 25 | 315 | 2800 | 24 | 190 | 70 | 20/30 | > 800 | 100/120 | 540 |
M290 | 60 | 15 | 330 | 2800 | 24 | 190 | 70 | 20/30 | > 800 | 100/120 | 540 |
M290S | 60 | 25 | 340 | 2800 | 24 | 190 | 70 | 20/30 | > 800 | 100/120 | 540 |
Position | M250 | M250S | M290 | M290S |
---|---|---|---|---|
CM | CM | CM | CM | |
A | 250 | 250 | 290 | 290 |
B | 310 | 310 | 330 | 330 |
C | 200 | 200 | 240 | 240 |
D | 185 | 185 | 210 | 210 |
E | 260 | 260 | 280 | 280 |
F | 75 | 75 | 75 | 75 |
H | 130 | 130 | 130 | 130 |
A - Max working length on levelled ground
B - Max working length in vertical position
C - Max working length at 45°
D - Max working length at 45° (ditch)
E - Max height above the side a hedge
F - Minimum height above the side of the hedge
H - Minimum width of tractor and machine on hedge